3 HP Motor 10 in. UNISAW® with 36 in. BIESEMEYER® Fence System 36-L336

Get ready for something radically different. The legendary UNISAW has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER Fence accurate to 1/64 in. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.

Buy Now

Features

  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
  • On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
  • UL Listed

Specifications

  • Motor: 3 HP, 230V, 1 Phase, 60 Hz
  • Arbor Size: 5/8 in.
  • Blade Diameter: 10 in.
  • Blade Speed: 4,300 RPM
  • Max Rip To Right Of Blade: 36 in.
  • Max Rip To Left Of Blade: 13 1/2 in.
  • Depth of Cut at 45°: 2 1/8 in.
  • Depth of Cut at 90°: 3 1/8 in.
  • Distance - Front of Table to Center of Blade: 18 1/2 in.
  • Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
  • Max Width of Dado: 1 1/8 in.
  • Miter Gauge Groove: 3/8 in. x 3/4 in.
  • Chip Exhaust Opening: 4 in. and 5 in.
  • Table Height: 35 in.
  • Size of Cast Iron Top (with wings only): 31 in. x 40 in.
  • Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 64 in.
  • Length: 71 in.
  • Width: 37 in.
  • Width with Fence on Saw: 46 in.
  • Height: 35 in.
  • Weight: 624 lbs.

Warranty

Delta Machinery 5 Year Warranty

3 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System 36-L352

Get ready for something radically different. The legendary UNISAW has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER Fence accurate to 1/64 in. A single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection

Buy Now

Features

  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
  • On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
  • UL Listed

Specifications

  • Motor: 3 HP, 230V, 1 Phase, 60 Hz
  • Arbor Size: 5/8 in.
  • Blade Diameter: 10 in.
  • Blade Speed: 4,300 RPM
  • Max Rip To Right Of Blade: 52 in.
  • Max Rip To Left Of Blade: 13 1/2 in.
  • Depth of Cut at 45°: 2 1/8 in.
  • Depth of Cut at 90°: 3 1/8 in.
  • Distance - Front of Table to Center of Blade: 18 1/2 in.
  • Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
  • Max Width of Dado: 1 1/8 in.
  • Miter Gauge Groove: 3/8 in. x 3/4 in.
  • Chip Exhaust Opening: 4 in. and 5 in.
  • Table Height: 35 in.
  • Table Size of Cast Iron Top (with wings only): 31 in. x 40 in.
  • Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 82 in.
  • Length: 87 in.
  • Width: 37 in.
  • Width with Fence on Saw: 46 in.
  • Height: 35 in.
  • Weight: 661 lbs.

Warranty

Delta Machinery 5 Year Warranty

5 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System 36-L552

Get ready for something radically different. The legendary UNISAW has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER Fence accurate to 1/64 in. A single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.

Buy Now

Features

  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
  • On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
  • UL Listed

Specifications

  • Motor: 5 HP, 230V, 1 Phase, 60 Hz
  • Arbor Size: 5/8 in.
  • Blade Diameter: 10 in.
  • Blade Speed: 4,300 RPM
  • Max Rip To Right Of Blade: 52 in.
  • Max Rip To Left Of Blade: 13 1/2 in.
  • Depth of Cut at 45°: 2 1/8 in.
  • Depth of Cut at 90°: 3 1/8 in.
  • Distance - Front of Table to Center of Blade: 18 1/2 in.
  • Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
  • Max Width of Dado: 1 1/8 in.
  • Miter Gauge Groove: 3/8 in. x 3/4 in.
  • Chip Exhaust Opening: 4 in. and 5 in.
  • Table Height: 35 in.
  • Table Size of Cast-Iron Top (with wings only): 31 in. x 40 in.
  • Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 82 in.
  • Length: 87 in.
  • Width: 37 in.
  • Width with Fence on Saw: 46 in.
  • Height: 35 in.
  • Weight: 665 lbs.

Warranty

Delta Machinery 5 Year Warranty

36-5000 Delta 10” Left Tilt Contractor Saw with 30 in. RH Rip with Steel Wings

The Delta 36-5000 10” left tilt table saw was designed with the contractor in mind. It is maximized for precision, stability, mobility, and durability. The heavy duty one piece rail system, along with the Biesemeyer style fence with dual rip windows allows for precision cuts every time. A unique tubular stand with two fixed wheels and one swivel wheel makes the 36-5000 very stable and easy to move.

Buy Now

Features

  • Unique Tubular Stand for maximum support and stability
  • Ease of mobility with two fixed wheels and one swivel wheel
  • Cast iron table top with 1-LH and 2-RH stamped steel extension wings.
  • Heavy duty one piece rail system for precision cuts every time
  • Heavy Duty Biesemeyer style fence with Dual rip windows
  • Quick Assembly stand with less parts, allows fast assembly.
  • Blade Brake stops the blade within seconds of the power being turned off
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • UL Listed

Specifications

  • Motor: 15 Amp Induction Motor, 1 PH, 60 Hz
  • Voltage: Dual Voltage 120V – 240V
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ¼ in.
  • Max. Rip Right of Blade: 30 in.
  • Max. Rip Left of Blade: 15 in.
  • Table Size: 20 in. wide X 27 in. deep (50 in. wide X 27 in. deep with WINGS)
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: FIT 2-1/2” HOSE (WITH 4” ADAPTER)
  • Width with Fence: 57 in.
  • Height: 44 in.
  • Depth :33 in.
  • Weight:230 lbs. Net

Warranty

Delta Machinery 5 Year Warranty

Delta 26-2250 12 in. Dual Bevel Sliding Cruzer Miter Saw

Introducing Delta CRUZER miter saws- with robot arms from military-grade aluminum for unsurpassed accuracy, smoothness and durability. Plus control features that make CRUZERS the fastest dual-bevel miter saws available today. Available in 12 inch or 10 inch blade models, CRUZERS have the latest technology available in miter saws.

It starts with a heavy-duty base table, with a wide, sliding fence to securely hold crown molding up to 7.5 inches nested or 6.5 inch vertical baseboard. You get 60 degree right and 50 degree left miter capability with positive stops at the most common miter positions.

The patented load arm support bracket is military-grade aluminum for incredible accuracy right out of the box and for years after. Heavy-duty bearings provide unparalleled smoothness in the travel. You can even adjust the travel to your desired tension.

An easy-to reach bevel switch lets you bevel 45 degrees left or right. Stops at the most popular bevel angles and an accessable override switch make Delta CRUZERS the fastest, easiest to use miter saws available.

Buy Now

Features

  • 12 in. blade with versatile flip-down fence design for industry-best 18 in. crosscut capacity
  • Adjustable crown fence lock increases stacked crown capacity at 45° to 7-1/2 inches
  • Dual bevel 47° left/47° right with front bevel release and 7 positive stops at the most popular bevel angles and an easy to reach lever override to move between stops.
  • 50° left miter/60° right miter capacity with 10 miter detents and positive stops
  • One-hand front miter controls with push button miter detent override and front bevel release for quick movement
  • Flip-down slide lock for super accurate plunge cuts of crown and other stacked trim pieces
  • Easily adjustable sliding tension for personalizing slide action
  • Molded handle and ergonomic trigger is comfortable for right or left handed users
  • 15 amp motor for powerful cuts and blade brake for safety
  • Adjustable cutting depth
  • Clear retractable blade guard for full view of cutting area during alignment and cutting
  • 1.5 in dust port for vacuum connection and excellent dust collection
  • 5 year Delta warranty

Specifications

  • Voltage: 120V
  • Amps: 15A
  • Blade Size: 12 in. dia.
  • Arbor Hole Size: 1 in.
  • Speed (RPM): 4,000 r/min
  • Weight: 57lbs
  • Max Cut Thickness: 6.5 in.
  • Cord Length: 7 ft.
  • Warranty: 5 years
  • Product Depth: 30 in.
  • Product Height: 21.5 in.
  • Product Width: 25.5 in.
  • Bevel Type: dual
  • Tool Type: Miter Saw
  • Dust Collection Type: Port
  • Blade Change: Keyed (Torx Wrench)
  • Max degree Miter Cuts Left: 50°
  • Max Degree Miter Cuts Right: 60°
  • Miter Saw Type: Sliding Compound
  • Tool Product Type: Power Tool

Cut Capacities

  • Maximum: 1.5 in. X 17.25 in. (2 X 18 lumber)
  • Miter 0° / Bevel 0°: 3.5 in. X 13.25 in. (4 X 14 lumber)
  • Miter 0° / Bevel 45°: 1.5 in. X 13.25 in. (2 X 14 lumber)
  • Miter 45° / Bevel 0°: 3.5 in. X 9.25 in. (4 X 10 lumber)
  • Miter 45° / Bevel 45°: 1.5 in. X 9.25 in. (2 X 10 lumber)
  • Baseboard (Vertical): 6.5 in. (maximum cutting depth)
  • Crown (Nested): 7.5 in.

Warranty

Delta Machinery 5 Year Warranty

Delta 26-2240 10 in. Dual Bevel Sliding Cruzer Miter Saw

Introducing Delta CRUZER miter saws- with robot arms from military-grade aluminum for unsurpassed accuracy, smoothness and durability. Plus control features that make CRUZERS the fastest dual-bevel miter saws available today. Available in 12 inch or 10 inch blade models, CRUZERS have the latest technology available in miter saws.

It starts with a heavy-duty base table, with a wide, sliding fence to securely hold crown molding up to 7.5 inches nested or 6.5 inch vertical baseboard. You get 60 degree right and 50 degree left miter capability with positive stops at the most common miter positions.

The patented load arm support bracket is military-grade aluminum for incredible accuracy right out of the box and for years after. Heavy-duty bearings provide unparalleled smoothness in the travel. You can even adjust the travel to your desired tension.

An easy-to reach bevel switch lets you bevel 45 degrees left or right. Stops at the most popular bevel angles and an accessable override switch make Delta CRUZERS the fastest, easiest to use miter saws available.

Buy Now

Features

  • 10 in. blade with versatile flip-down fence design provides best-in-class 16 in. crosscut capacity
  • Dual bevel 45° left/45° right with front bevel release and 7 positive bevel stop at the most popular angles and easy to reach lever override to move between stops
  • 50° left miter/60° right miter capacity with 10 miter detents and positive stops
  • One-hand front miter controls with push button miter detent override and front bevel release for quick movement
  • Molded handle and full size trigger is comfortable for right or left handed users
  • 15 amp motor for powerful cuts and blade brake for safety
  • Clear retractable blade guard for full view of cutting area during alignment and cutting
  • 1.5 in. dust port for vacuum connection and excellent dust collection
  • 5 year Delta warranty

Specifications

  • Voltage: 120V
  • Amps: 15A
  • Blade Size: 10 in. dia.
  • Arbor Hole Size: 5/8 in.
  • Speed (RPM): 4,000 r/min
  • Weight: 55lbs
  • Max Cut Thickness: 5.5 in.
  • Cord Length: 7 ft.
  • Warranty: 5 years
  • Product Depth: 29.5 in.
  • Product Height: 20 in.
  • Product Width: 22.5 in.
  • Bevel Type: dual
  • Tool Type: Miter Saw
  • Dust Collection Type: Port
  • Blade Change: Keyed (Torx Wrench)
  • Max degree Miter Cuts Left: 50°
  • Max Degree Miter Cuts Right: 60°
  • Miter Saw Type: Sliding Compound
  • Tool Product Type: Power Tool

Cut Capacities

  • Maximum 1.5 in. X 15.25 in. (2 X 16 lumber)
  • Miter 0° / Bevel 0° 3.5 in. X 11.25 in. (4 X 12 lumber)
  • Miter 0° / Bevel 45° 1.5 in. X 11.25 in. (2 X 12 lumber)
  • Miter 45° / Bevel 0° 3.5 in. X 7.25 in. (4 X 8 lumber)
  • Miter 45° / Bevel 45° 1.5 in. X 7.25 in. (2 X 8 lumber)
  • Baseboard (Vertical) 5.5 in. (maximum cutting depth)
  • Crown (Nested) 6.25 in.

Warranty

Delta Machinery 5 Year Warranty

36-5052 DELTA 10 in. Left Tilt Contractor Saw with 52 in. RH Rip with Steel Wings

The Delta 36-5052 10” left tilt table saw was designed with the contractor in mind. It is maximized for precision, stability, and durability. The cast iron table top with left and right hand stamped steel extension wings allows for a huge 52 inch right hand rip capacity. The heavy duty one piece rail system, and the Biesemeyer style fence has dual rip windows allowing for precision cuts every time. A unique tubular stand with two fixed wheels and one swivel wheel makes the 36-5052 very stable and easy to move.

Buy Now

Features

  • Unique Tubular Stand for maximum support and stability
  • Ease of mobility with two fixed wheels and one swivel wheel
  • Cast iron table top with LH and RH stamped steel extension wings.
  • Heavy duty one piece rail system for precision cuts every time
  • Heavy duty RH extension board with support legs
  • Heavy Duty Biesemeyer style fence with Dual rip windows
  • Quick Assembly stand with less parts, allows fast assembly.
  • Blade Brake stops the blade within seconds of the power being turned off
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • UL Listed

Specifications

  • Motor: 15 Amp Induction Motor, 1 PH, 60 Hz
  • Voltage: Dual Voltage 120V – 240V
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ¼ in.
  • Max. Rip Right of Blade: 52 in.
  • Max. Rip Left of Blade: 15 in.
  • Table Size: 20 in. wide X 27 in. deep (40 in. wide X 27 in. deep with WINGS and 76-1/2 in. wide with extension board)
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: FIT 2-1/2” HOSE (WITH 4” ADAPTER)
  • Width with Fence: 83 in.
  • Height: 44 in.
  • Depth :33 in.
  • Weight: 245 lbs. Net

Warranty

Delta Machinery 5 Year Warranty

36-5100 DELTA 10 in. Left Tilt Contractor Saw with 30 in. RH Rip with Cast Iron Wings

The Delta 36-5100 10” left tilt table saw was designed with the contractor in mind. It is maximized for precision, stability, mobility, and durability. The heavy duty one piece rail system, along with cast iron left and right hand wing extension, and the Biesemeyer style fence with dual rip windows allows for precision cuts every time. A unique tubular stand with two fixed wheels and one swivel wheel makes the 36-5100 very stable and easy to move.

Buy Now

Features

  • Unique Tubular Stand for maximum support and stability
  • Ease of mobility with two fixed wheels and one swivel wheel
  • Cast Iron table top with LH and RH cast iron extension wings
  • Includes extra RH stamped steel extension wing.
  • Heavy duty one piece rail system for precision cuts every time
  • Heavy Duty Biesemeyer style fence with Dual rip windows
  • Quick Assembly stand with less parts, allows fast assembly.
  • Blade Brake stops the blade within seconds of the power being turned off
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • UL Listed

Specifications

  • Voltage: Dual Voltage 120V – 240V
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ¼ in.
  • Max. Rip Right of Blade: 30 in.
  • Max. Rip Left of Blade: 15 in.
  • Table Size: 20 in. wide X 27 in. deep (50 in. wide X 27 in. deep with WINGS)
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: FIT 2-1/2” HOSE (WITH 4” ADAPTER)
  • Width with Fence: 57 in.
  • Height: 44 in.
  • Depth :33 in.
  • Weight: 260 lbs. Net

Warranty

Delta Machinery 5 Year Warranty

36-5152 DELTA 10 in. Left Tilt Contractor Saw with 52 in. RH Rip with Cast Iron Wings

The Delta 36-5152 10” left tilt table saw was designed with the contractor in mind. It is maximized for precision, stability, and durability. The cast iron table top with left and right hand cast iron extension wings allows for a 52 inch right hand rip capacity. The heavy duty one piece rail system, and the Biesemeyer style fence has dual rip windows allowing for precision cuts every time. A unique tubular stand with two fixed wheels and one swivel wheel makes the 36-5152 very stable and easy to move.

Buy Now

Features

  • Unique tubular stand for maximum support and stability
  • Ease of mobility with two fixed wheels and one swivel wheel
  • Cast iron table top with LH and RH cast iron extension wings.
  • Heavy duty one piece rail system for precision cuts every time
  • Heavy duty RH extension board with support legs
  • Heavy Duty Biesemeyer style fence with dual rip windows
  • Quick assembly stand with less parts, allows fast assembly.
  • Blade Brake stops the blade within seconds of the power being turned off
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • UL Listed

Specifications

  • Motor: 15 Amp Induction Motor, 1 PH, 60 Hz
  • Voltage: Dual Voltage 120V – 240V
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ¼ in.
  • Max. Rip Right of Blade: 52 in.
  • Max. Rip Left of Blade: 15 in.
  • Table Size: 20 in. wide X 27 in. deep (40 in. wide X 27 in. deep with WINGS and 76-1/2 in. in. wide with extension board)
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: FIT 2-1/2” HOSE (WITH 4” ADAPTER)
  • Width with Fence: 83 in.
  • Height: 44 in.
  • Depth :33 in.
  • Weight: 305 lbs. Net

Warranty

Delta Machinery 5 Year Warranty

DELTA 36-725 13-Amp 10-in Carbide-Tipped Table Saw

The DELTA 13-Amp 10-in Carbide-Tipped Table Saw is LOWES EXCLUSIVE.

This 10-in contractor table saw provides the function and flexibility you need on the job. The 13-amp enclosed induction motor generates enough power to rip thick stock or challenging dados, while the cast-iron tabletop offers a sturdy and roomy workspace. The T-square locking rip fence provides precise cuts that are accurate to 1/64-in, and the steel rails with spreader have the capability to handle even the widest stock. The integrated dust collection system allows wet/dry vacuum hookup to the 2.5-in dust port, keeping sawdust mess to a minimum. The locking bevel and height adjustment wheels provide consistency when making repetitive cuts, and 3/4-in wide miter gauge T-slots accommodate accessories such as feather boards. The tubular rolling stand means you can easily transport the saw around the jobsite as needed.

Buy Now

Features

  • Includes saw, rolling stand, 10-in blade and locking rip fence
  • 13-amp enclosed induction motor generates 3,600-RPM to rip thick stock or challenging dados
  • 10-in carbide-tipped blade is durable and the built-in arbor lock allows for quick and easy blade changes
  • 30-in right rip capacity and 15-in left rip capacity accommodates a wide range of sizes
  • T-square 3-point locking rip fence provides precise cuts, and steel rails with spreader accommodates the widest stock
  • Easy-to-assemble tubular stand with easy-lift caster system
  • 5-year limited warranty
  • Cast-iron 27.13-in L x 20.24-in W tabletop offers plenty of workspace
  • Locking bevel and height adjustment wheels allow for consistency when making repetitive cuts

Specifications

  • Motor: 13 AMP, 120V
  • Arbor Size: 5/8 in.
  • Blade Diameter: 10 in.
  • Blade Speed: 3,600 RPM
  • Max Right Rip Capacity: 30 in.
  • Max Left Rip Capacity: 15 in.
  • Depth of Cut at 45°: 2 1/2 in.
  • Depth of Cut at 90°: 3 3/4 in.
  • Distance - Front of Table to Center of Blade: 18 1/2 in.
  • Table Length: 27.13 in.
  • Table Height: 35 in.
  • Cutting Depth: 3 1/2 in.
  • Weight: 197 lbs.

Warranty

Delta Machinery 5 Year Warranty

Delta 36-6020 Portable Table Saw with Stand

The Delta 36-6020 table saw was designed with the woodworker in mind. It is maximized for precision, stability, and storage. An easy one step folding stand allows for a quick and easy cleanup. Industry standard tool-free split guard design allows a true rise and fall riving knife by using a lever on the inside of the throat plate.

Buy Now

Features

  • Unique tubular frame for maximum support and stability
  • Easy “One Step” folding stand for fast removal and storage.
  • Stand and saw are one piece framework for more stability.
  • Aluminum table top with RH table extension.
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • Blade retracts below table top for easy clean-up of table top.
  • cULus Listed

Specifications

  • Motor: 15 Amp Universal Motor, 1 PH, 60 Hz
  • Voltage: 120V
  • Speed: 5000 RPM
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ½ in.
  • Max. Rip Right of Blade: 30 in.
  • Max. Rip Left of Blade: 7 ¼ in.
  • Table Size: 19.56 in. wide X 26 in. deep
  • Table Coating: Yes, Anti-Friction
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: 2 ½ in.
  • Width with Fence: 47 ¼ in.
  • Table Height: 34 ¾ in.
  • Depth : 36 7/16 in. in.

Warranty

Delta Machinery 5 Year Warranty

Delta 36-6022 Portable Table Saw with Stand

The Delta 36-6022 table saw was designed with the woodworker in mind. It is maximized for precision, stability, and storage. The 30” right hand rip capacity and 12” left hand rip capacity makes the 36-6022 perfect for any job. An easy one step folding stand allows for a quick and easy cleanup. Industry standard tool-free split guard design allows a true rise and fall riving knife by using a lever on the inside of the throat plate.

Buy Now

“Great saw. The problem I had before, moving depth adjustment, was resolved by turning the bevel lock all the way clockwise. It wasn’t obvious that the bevel lock doubles as the height adjustment lock. I no longer have the issue of the saw lowering on start up. The saw is accurate and the fence is nice and sturdy. I really like all the on board storage and the stand is awesome. Highly recommend the saw. I wish I could edit my last review.” - Home Depot Review

Features

  • Up to 30” RH rip and 12” LH rip capacities.
  • New “T” style fence for improved accuracy.
  • Unique tubular frame for maximum support and stability.
  • Easy “One Step” folding stand for fast removal and storage.
  • Saw can be removed from stand for use as box saw.
  • Aluminum table top with RH table extension.
  • Large, easy to access ON/OFF switch.
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • Blade retracts below table top for easy clean-up of table top.
  • Fence and guard storage on side of saw.

Specifications

  • Motor: 15 Amp Universal Motor, 1 PH, 60 Hz
  • Voltage: 120V
  • Speed: 5000 RPM
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90° : 3 ½ in.
  • Max. Depth of Cut at 45° : 2 ½ in.
  • Max. Rip Right of Blade: 30 in.
  • Max. Rip Left of Blade: 12 in.
  • Table Size: 19.56 in. wide X 26 in. deep
  • Table Coating: Yes, Anti-Friction
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: 2 ½ in.
  • Width with Fence: 45 ¾ in.
  • Table Height: 34 ¾ in.
  • Depth: 36 7/16 in. in
  • Weight: 92 lbs

Warranty

Delta Machinery 5 Year Warranty

Delta 36-6010 Portable Table Saw

The Delta 36-6010 table saw was designed with a unique tubular frame for maximum stability and support. The aluminum table top with a right hand table extension allows for smooth and precise cuts. Industry standard tool-free split guard design allows a true rise and fall riving knife by using a lever on the inside of the throat plate. The Blade retracts below the table top of a quick and easy clean up.

Buy Now

Features

  • Unique tubular frame for maximum support and stability
  • Aluminum table top with RH table extension.
  • Large, easy to access ON/OFF switch
  • Industry Standard tool-free split guard design allows a true rise-and fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls.
  • Blade retracts below table top for easy clean-up of table top.
  • cULus Listed

Specifications

  • Motor: 15 Amp Induction Motor, 1 PH, 60 Hz
  • Voltage: 120V
  • Speed: 5000 RPM
  • Arbor: 5/8 in.
  • Blade Tilt: 45° Left
  • Max. Depth of Cut at 90°: 3 ½ in.
  • Max. Depth of Cut at 45°: 2 ½ in.
  • Max. Rip Right of Blade: 30 in.
  • Max. Rip Left of Blade: 7 ¼ in.
  • Table Size: 19.56 in. wide X 26 in. deep
  • Table Coating: Yes, Anti-Friction
  • Dado Capacity: 13/16 in. X 8 in. STACKED DADO
  • Dust Port Size: 2 ½ in.
  • Width with Fence: 47 ¼ in. .
  • Height: 14.62 in.
  • Depth : 36 7/16 in.

Warranty

Delta Machinery 5 Year Warranty

36-852 1 HP 3 Phase 4 Speed 3 Roller Production Stock Feeder

The 36-852 includes 1HP, 230V, 3 Phase, two-speed reversing motor, power cord, 3 rubber feed rollers, vertical and horizontal support columns, universal joints and lubricating gun.

Buy Now

Features

  • Rugged, efficient drive system. Continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.
  • Fully-adjustable support columns. Feeders come equipped with sturdy vertical and horizontal support columns and universal joints that feature either “T” or “L” locking mechanisms for securing feeders into horizontal, vertical or angled-feeding positions. Large hand wheels move feeders horizontally or vertically along columns. Four bolts hold vertical support column to table surface.

Specifications

  • Motor: 1 HP, 230V, 60 Hz, 3 Phase
  • Speeds: 13, 26, 36, 72 FPM
  • Vertical Range of Adjustment: 12 in. to 21 1/2 in.
  • Horizontal Range of Adjustment: 7 3/4 in. to 25 in.
  • Min Length of Stock: 6 in.
  • WheelsDiameter: 4 3/4 in.Width: 2 1/4 in.Roller Suspension: 3/4 in.
  • Rollers: 3
  • Height: 18 in.
  • Width: 11 1/2 in.
  • Length: 18 in.
  • Weight: 133 lbs.
  • Shipping Weight: 140 lbs.

Warranty

Delta Machinery 5 Year Warranty

36-851 1 HP 1 Phase 4 Speed 3 Roller Production Stock Feeder

The 36-851 includes 1HP, 240V, 1 Phase, two-speed reversing motor, power cord, 3 rubber feed rollers, vertical and horizontal support columns, universal joints and lubricating gun.

Buy Now

Features

  • Rugged, efficient drive system. Continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.
  • Fully-adjustable support columns. Feeders come equipped with sturdy vertical and horizontal support columns and universal joints that feature either “T” or “L” locking mechanisms for securing feeders into horizontal, vertical or angled-feeding positions. Large hand wheels move feeders horizontally or vertically along columns. Four bolts hold vertical support column to table surface.

Specifications

  • Motor: 1 HP, 240V, 60 Hz, 1 Phase
  • Speeds: 13, 26, 36, 72 FPM
  • Vertical Range of Adjustment: 12 in. to 21 1/2 in.
  • Horizontal Range of Adjustment: 7 3/4 in. to 25 in.
  • Min Length of Stock: 6 in.
  • WheelsDiameter: 4 3/4 in.Width: 2 1/4 in.Roller Suspension: 3/4 in.
  • Rollers: 3
  • Height: 18 in.
  • Width: 11 1/2 in.
  • Length: 18 in.
  • Weight: 133 lbs.
  • Shipping Weight: 140 lbs.

Warranty

Delta Machinery 5 Year Warranty

40-694 20 in. Variable Speed Scroll Saw

The 40-694 20 inch variable speed scroll saw is designed for quality and precision. The large, cast-iron table provides excellent material support and bevels 0° - 45° left and right. The unique dual parallel-link arm design reduces vibration and noise and keeps the blade perpendicular to the work surface which dramatically reduces over or under cutting, improving accuracy and quality. The single lever, tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy.

Buy Now

Features

  • Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Unique dual parallel-link arm design reduces vibration and noise and keeps the blade perpendicular to the work surface which dramatically reduces over or under cutting, improving accuracy and quality
  • Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
  • Tool-free blade clamp allows for quick, easy blade changes in seconds
  • Single lever, tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy
  • Large, cast-iron table provides excellent material support and bevels 0° - 45° left and right
  • On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

Specifications

  • Motor: 1.3 Amp
  • Speeds: 400-1,750 SPM
  • Capacity: 20 in.
  • Stroke Length: 3/4 in.
  • Table Size: 16 in. x 24 in.
  • Table Tilt: 0°-45°, Left and Right at 45°: 1 5/8 in.
  • Cutting Capacities: at 90°: 2 1/8 in.
  • Assembled Depth: 39 in.
  • Assembled Width: 16 in.
  • Weight: 70 lbs.

Warranty

Delta Machinery 5 Year Warranty

31-484 Heavy Duty Oscillating Floor Spindle Sander

The 31-484 heavy duty oscillating floor spindle sander was designed for precision and durability. The fully enclosed heavy duty steel frame construction is optimized for dust management and keeps vibration to a minimum. The Heavy duty cast iron trunnion system supports oil bath gear box, which provides increased stability and accuracy. A unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat.

Buy Now

Features

  • Powerful 1 HP, 110V motor with 1,725 RPM spindle speed and 71 oscillations per minute
  • Fully enclosed, heavy duty steel frame construction for optimum dust management and minimum vibration
  • 24 5/8 in. x 24 1/2 in. precision ground cast iron table
  • 1 1/2 in. oscillating action uses more of the sleeve, prolonging life of the sleeve while protecting wood from excess heat created by a fixed oscillating spindle
  • Unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat
  • Adjustable positive stops at 45° and 90° and large bevel scale for accuracy and convenience
  • Heavy duty, cast iron trunnion system supports oil bath gear box; provides increased stability and accuracy
  • Smooth precision ball bearings support the main spindle and heavy duty worm and gear mechanism drives the oscillations
  • Removable rear access panel making spindle adjustments and changes easier
  • Oversized cast iron, chrome polished tilt wheel with knurled lock knob
  • On-tool storage for all inserts, spindles and wrenchesIncludes 10 interchangeable threaded spindles with 100 grit sanding sleeves (1/4 in., 3/8 in., 1/2 in., 5/8 in., 3/4 in., 1 in., 1 1/2 in., 2 in., 3 in., and 4 in.), 6 inserts, power lock-off pin and 2 wrenches

  • CSA Listed

Specifications

  • Motor: 1 HP, 110V, 1 Phase
  • Speeds: 1,725 RPM, 71 OPM with 1 1/2 in. oscillation length
  • Table: 24 5/8 in. x 24 1/2 in., fixed, precision ground cast iron
  • Table Height: 38 3/8 in.
  • Insert Diameter: 8 3/4 in.
  • Dust Port: 4 in.
  • Base Dimensions: 24 3/4 in. depth x 19 3/4 in. width
  • Dimensions (D x W x H): 24 3/4 in. x 19 3/4 in. x 38 3/8 in.
  • Max Depth w/ Handle and Motor Cover: 38 in.
  • Shipping Dimensions: 31.10 in. x 29.92 in. x 45.67 in.
  • Weight: 374 lbs.
  • Shipping Weight: 396 lbs.

Warranty

Delta Machinery 5 Year Warranty

31-483 Heavy Duty Oscillating Bench Spindle Sander

The 31-483 heavy duty oscillating bench spindle sander is equipped with a powerful 1/2 Horse Power, 115 Volt motor with a 1,725 rotation per minute spindle speed and 29 oscillations per minute. The fully enclosed heavy duty steel frame construction is designed to keep vibration at a minimum. A heavy duty, steel table support and bevel system provides increased stability and long-lasting durability.

Buy Now

Features

  • Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute
  • Fully enclosed, heavy duty steel frame construction for minimum vibration
  • 14 3/4 in. x 14 3/4 in. precision ground cast iron table
  • 15/16 in. oscillating action uses more of the sleeve, prolonging life of the sleeve
  • 0° to 45° tilting table design allows for accurate bevel sanding
  • Positive stop at 90° and large bevel scale for accuracy and convenience
  • Heavy duty, steel table support and bevel system provides increased stability and long-lasting durability
  • Twin locking handles for stability in bevel position
  • Smooth precision ball bearings support the main spindle and heavy duty worm and gear mechanism drives the oscillations
  • On-tool storage for all inserts, spindles and wrenches
  • Includes 5 interchangeable threaded spindles with 100 grit sanding sleeves (1/4 in., 1/2 in., 5/8 in., 1 1/2 in., and 2 in.), rubber drums on 1 1/2 in. and 2 in. spindles, 4 inserts, power lock-off pin, 2 1/4 in. to 4 in. dust port adaptor and 3 wrenches
  • CSA Listed

Specifications

  • Motor: 1/2 HP, 115V, 1 Phase
  • Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
  • Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
  • Table Height: 18 in.
  • Opening Diameter for Inserts: 5 1/2 in.
  • Spindle Length: 5 1/2 in.
  • Dust Port: 2 1/4 in., included adaptor for up to 4 in.
  • Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width
  • Dimensions (D x W x H): 14 3/4 in. x 14 3/4 in. x 18 in.
  • Shipping Dimensions: 17.32 in. x 16.93 in. x 20.87 in.
  • Weight: 66 lbs.
  • Shipping Weight: 73 lbs.

Warranty

Delta Machinery 5 Year Warranty

31-482 6 in. x 89 in. Oscillating Edge Sander

​The 31-482 oscillating edge sander is equipped with a powerful 1 1/2 horsepower dual voltage motor that is ready to power through even the toughest jobs. The 1/4 inch belt oscillation ensures full use of the belt, which reduces uneven wear and helps reduce the potential for sanding lines while prolonging belt life. The large belt surface allows for edge and surface sanding, as well as the additional option of contour and inside curve sanding using the cast iron table attachment around the drum on the motor side of the machine.

.

Buy Now

Features

  • Powerful 1 1/2 HP, dual voltage 115V/230V (wired 230V), 1 phase motor with 3,900 SFPM belt speed and 108 OPM
  • 1/4 in. Belt oscillation ensures full use of the belt, reduces uneven wear and helps reduce the potential for sanding lines while prolonging belt life
  • Table height easily adjusts to position workpiece in order to use a specific area of the sanding belt
  • Aggressive, powerful sanding system for quick material removal in vertical or horizontal positions and any bevel positions in between
  • Large belt surface allows for edge and surface sanding and the additional option of contour and inside curve sanding using the 9 3/4 in. x 11 3/4 in. cast iron table attachment around the 4 1/4 in. drum on the motor side of the machine
  • Heavy duty steel, adjustable 24 in. x 4 in. fence for horizontal sanding
  • Precision ground steel platen with graphite pad provides consistent sanding results
  • Graphite pad also keeps the platen cool during operation which helps eliminate distortion and extends belt life
  • Large, 29 3/4 in. x 10 in. cast iron support table with t-slot
  • Locking t-slot miter gauge provided for sanding miter angles
  • Convenient, top-mounted tensioning lever and tracking controls
  • Integral dust shroud and 4 in. dust port ensure optimum dust management
  • Includes back stop, sanding drum cast iron support table, miter gauge, tracking tool, fence, (1) 6 in x 89 in. 100 grit sanding belt, and adjustment tools/wrenches
  • CSA Listed

Specifications

  • Motor: 1 1/2 HP, 115V/230V (wired 230V), 1 Phase, TEFC
  • Belt Speeds: 3,900 SFPM; 108 OPM
  • Main Table: 10 in. depth x 29 3/4 in. length
  • Sanding Drum Table: 9 3/4 in. depth x 11 3/4 in. length
  • Drum Size: 4 1/4 in., aluminum
  • Base Dimensions: 16 1/4 in. depth x 21 1/4 in. width
  • Max Depth: Belt horizontal, including lever: 23 in.
  • Max Width: Drum support table, mounted: 50 in.
  • Max Height: Belt vertical, including lever: 49 in.
  • Lowest Table Height: 38 in.
  • Most Compact Position Dimensions: 22 in. x 47 in. x 44 in.
  • Shipping Dimensions: 49.61 in. x 26.38 in. x 20.47 in.
  • Weight: 218 lbs.
  • Shipping Weight: 233 lbs.

Warranty

Delta Machinery 5 Year Warranty

31-481 26 in. Dual Drum Sander

The 31-481 26 inch dual drum sander is designed with a heavy duty steel Frame and superior finish for long lasting durability. The strong 3 Horse power main motor will help you get the job done with ease. The independent adjustable rear drum offers one pass sanding capability using 2 grits, reducing processing time. Tool-less drum wrap tensioning clamps make installation and removal of sanding strips easy, requiring less downtime.

Buy Now

Features

  • ​Industrial 3 HP, 230V, 60 Hz, 1 Phase Main Motor with magnetic controls; 1/6 HP, 1 phase, variable speed feed belt motor with feed speeds from 3 FPM to 20 FPM; drum speed 1,550 RPM
  • Increased capacity allows for sanding material up to 12 1/4 in. deep x 25 1/2 in. wide
  • Independent adjustable rear drum offers one pass sanding capability using 2 grits, reducing processing time
  • Rear roller adjustment dials ensure rear drum is level
  • Heavy duty steel frame design with superior finish for long-lasting durability
  • Latching top door provides direct access to dual drums for ease in sanding wrap changes
  • Toolless drum wrap tensioning clamps make installation and removal of sanding strips easy, requiring less downtime
  • Magnetic on/off main motor switch; removable key switch for variable speed feed belt motor
  • Two 4 in. dust ports for efficient dust collection requiring a total of only 600 CFMIncludes (2) 4 in. integral dust ports, feed belt, (2) sanding drums, (1) 80 grit and (1) 120 grit sanding strips
  • CSA Listed

Specifications

  • Main Motor: 3 HP, 230V, 60 Hz TEFC, 1 Phase
  • Feed Motor: 1/6 HP, 1 Phase, Variable Speed
  • Speeds: 1,550 RPM Drums; 3 to 20 FPM Feed Belt
  • Sanding Capacity: 12 1/4 in. Thick x 25 1/2 in. Wide
  • Minimum Sanding Thickness: 1/4 in.
  • Minimum Length of Unbutted Stock: 6 in.
  • Drums: 5 in. x 26 in., Aluminum
  • Sanding Strip Size: 5 1/8 in. x 92 1/2 in.
  • Dimensions (Assembled): 31 in. x 46 in. x 53 in.
  • Base Dimension for Mobile Base: 17 3/4 in. x 43 in.
  • Shipping Dimensions: 48.3 in. x 32.68 in. x 51.97 in.
  • Weight: 418 lbs.
  • Shipping Weight: 484 lbs.

Warranty

Delta Machinery 5 Year Warranty

31-140 12 in. Disc Sander

The 31-140 12 inch disc sander features a tilting cast-iron table with left and right positive stops at 22.5°, 45°, and 90° lock in positions with one dual-purpose lock and bevel table adjustment handle. It has a convenient top mounted manual brake, which stops the sanding disc in seconds. The heavy-duty steel disc plate features a 12 in. diameter with an 80 grit abrasive disc for fast efficient sanding.

Buy Now

Features

  • Heavy duty cast iron construction with a heavy duty steel bevel assembly supporting the table
  • Powerful 1/2 HP, 120V motor for long-lasting, smooth performance
  • Convenient top-mounted manual brake stops sanding disc in seconds
  • Heavy-duty, steel disc plate features a 12 in. diameter, 80 grit abrasive disc for fast, efficient sanding
  • Tilting cast-iron table with left and right positive stops at 22.5°, 45° and 90° locks in position with one dual-purpose lock and bevel table adjustment handle
  • Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation
  • Dust hose with 2 1/4 in. O.D. connectors attaches quickly to any standard shop vacuum
  • Features a 3/8 in. x 3/4 in. miter gauge slot machined into the table for projects that require sanding an angle or straight edge
  • Cast-iron base with pre-drilled base holes for easy bench mounting
  • Includes miter gauge, hose with 2 1/4 in. O.D. connectors, (1) 80 Grit abrasive disc, wrenches
  • ETL Listed

Specifications

  • ​Motor: 1/2 HP, 120V, 1 Phase, 60 Hz
  • Speeds: 1,725 RPM
  • Disc Diameter: 12 in.
  • Table: 17 1/4 in. x 6 1/4 in., cast iron
  • Table Tilt: Up and Down 45°
  • Dimensions: 17 3/4 in. x 17 1/4 in. x 15 in.
  • Shipping Dimensions: 20.87 in. x 17.72 in. x 17.13 in.
  • Weight: 72.6 lbs.
  • Dust Port: 2 1/4 in.

Warranty

Delta Machinery 5 Year Warranty

22-590 13 in. Portable Thickness Planer

The 22-590 13 inch portable thickness planer was designed for maximum durability and precision. It features a Delta designed three knife cutter head that delivers an ultra smooth finish and up to three times longer blade life than competitive three knife planers. The snipe reduction system includes a patented cutterhead lock system and best in class in-feed/out-feed tables to minimize snipe, and reduce waste. The full width material removal gauge indicates the amount of material being removed with each pass across the entire width of the material, allowing you to utilize the entire width of the cutterhead.

Buy Now

Features

  • DELTA® designed three-knife cutter head delivers an ultra smooth finish and up to 3 times longer blade life than competitive 3-knife planers.
  • Snipe Reduction System features a patented cutterhead lock system and best-in-class infeed/outfeed tables to minimize snipe and reduce waste.
  • Infinite Micro-adjust depth stop allows the user to select a specific dimension for repeatable cuts at any dimension between 1 1/4 in. and 1/8 in.
  • Full width material removal gauge indicates the amount of material being removed with each pass across the entire width of the material, allowing the user to utilize the entire width of the cutterhead.
  • High-speed steel, indexed, double-sided knives provides 2X blade life and allows for quick plade changes.
  • Oversized cutterhead height adjustment handle with indexing ring provides easy macro and micro cutterhead adjustments
  • Cutterhead wrench and blade magnet minimizes blade contact during blade change
  • Powerful 15 Amp 120V motor powers the cutterhead and feed system through the most demanding hardwoods.
  • High efficiency 4 in. dust port removes dust chips and debris from the cutterhead when used with a dust collector.
  • CSA Listed

Specifications

  • ​Motor: 15 A, 120V, 1 Phase, 60 Hz
  • Motor Control: Oversized on/off paddle switch
  • Maximum Width of Stock: 13 in.
  • Maximum Thickness of Stock: 6 in.
  • Minimum Thickness Capacity: 1/8 in.
  • Maximum Depth of Cut: 1/8 in.
  • Minimum Length of Stock: 10 in.
  • Feed Rate: 26 FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 2 in.
  • Cutterhead Speed: 10,000 RPM
  • Infeed Rolls: Nitrile Rubber
  • Outfeed Rolls: Nitrile Rubber
  • Chip Chute Opening: Included 4 in. Dust Port
  • Height: 19.5 in.
  • Width: 22 in.
  • Depth: 14 in.
  • Weight: 76 lbs.

Warranty

Delta Machinery 5 Year Warranty

22-555 13 in. Portable Thickness Planer

The 22-555 13 inch portable thickness planer was designed for maximum stability, durability, and precision. The Four column design provides excellent stability for smooth, accurate planing over many years of use. The two polyurethane feed rollers make for a smooth no-slip grip on the workpiece and is positioned close to the cuttterhead to improve your workpiece’s finish. Don’t forget about the quick change knife system with dual edge disposable knives that let you change knives without difficult to use alignment jigs.

Buy Now

Features

  • Powerful 15A motor capable of handling the demands of a small shop.
  • Four column design provides excellent stability for smooth, accurate planing over many years of use
  • Quick change knife system with dual edge disposable knives lets you change knives without difficult-to-use alignment jigs
  • Adjustable Infeed and outfeed tables to better support long pieces and reduce snipe.
  • Reversible dust port allows you to collect chips from the right or left side of the planer.
  • Two polyurethane feed rollers for a no-slip grip on the workpiece; positioned close to the cutterhead to improve workpiece finish
  • Precision machined steel cutterhead for endurance and accuracy
  • Stainless steel bed reduces friction and improves motor efficiency
  • Overload button protects your motor from damage due to overheating.

Specifications

  • ​MOTOR: 15A, 120V, 60Hz, 1Ph
  • Max Stock Dimensions: 13 in. wide x 6 in. high
  • Max Depth of Cut: 3/32 in.
  • Cuts per minute: 18,800
  • Infeed/Outfeed table dimensions: 6 3/4 in. x 13 in. each
  • Number of Knives: 2
  • Dust Port Diameter: 2 1/16 in. Outer Diameter, 1 7/8 in. Inner Diameter
  • Weight: 58 lbs. Net
  • Motor Control: toggle with removable key
  • Min Stock Dimensions: 1/8 in. x 10 in.
  • Feed Rate: 28 ft/min
  • Infeed/Outfeed rollers: Nitrile synthetic rubber
  • Knife Type: Double edge reversible
  • Knife Size: 333 mm x 12 mm x 1.5 mm
  • Machine Dimensions: 21 5/8 in. x 23 5/8 in. x 20 1/8 in.

Warranty

Delta Machinery 5 Year Warranty

46-460 12 1/2 in. Variable Speed MIDI-LATHE®

The 2012 Tool Guide Editors went on a search for the Heavy-Duty Benchtop Lathes to look for in 2012. Each lathe was put through a series of tests including Starting RPM, RPM w/Resistance, Speed Loss and Torque tests.

At the conclusion of testing, the Editors decided that “Delta’s power and features stand out from the crowd” and subsequently awarded the DELTA 46-460 it’s coveted Editor’s Choice - Best Overall Award.

The 46-460 includes 6 in. and 10 in. Tool Rest, spur center, Chrome 3 in. Face Plate, tool rest base, Knockout Bar, live center, wrenches.

Buy Now

Features

  • Powerful 1 HP max, 1,725 RPM Motor
  • Large 12 1/2 in. swing capacity provides the largest capacity in its class
  • Electronic Variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
  • Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Sanding a turned piece against the grain will cut the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve this super smooth finish. With our competitors the turner would need to remount the work piece backward to achieve this dual rotation. This is time consuming and often impossible. With the Delta 46-460 it is a simple flip of the switch.
  • Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool lifE
  • 6 groove belt provides superior power to turn large objects
  • Indexing pin to lock the head stock spindle in 24 different locations for fluting and other decorative applications
  • All cast-iron construction provides stability and is extremely durable
  • Over Headstock On/Off switch provides easy in use access
  • Ball-bearing live center
  • Includes 3 in. face plate, 6 in. tool rest and 10 in. tool rest. Turning long spindles require either a longer tool rest or the user to continually move the short tool rest. Turning short work requires a short spindle; the long spindle will not allow the turner to get close enough to the piece.
  • On board storage for easy access to adjustment tools
  • Heavy-duty, steel knockout bar
  • CSA Listed

Specifications

  • Motor: 1 HP max, 120V, 60 Hz, 1 Phase
  • Speed: 250-700, 600-1,800 and 1,350-4,000 RPM
  • Swing Over Base: 9 9/16 in.
  • Drive Spindle: 1 in.-8 RH TPI Thread
  • Head and Tailstock Taper: #2 MT
  • Tailstock Spindle Travel: 2 1/4 in.
  • Length: 36 in.
  • Height: 17 3/4 in.
  • Shipping Weight: 106lbs.
  • Motor Control: Electronic Variable Speed
  • Swing Over Bed: 12 1/2 in.
  • Distance between Centers: 16 1/2 in. (with Extension: 42 in.)
  • Drive Spindle through Hole: 15/32 in. Self-ejecting
  • Tool Rest: 6 in. and 10 in.
  • Width: 11 in.
  • Weight: 97 lbs.

Warranty

Delta Machinery 5 Year Warranty

37-071 6 IN. MIDI-BENCH JOINTER

The 6 in. Jointer by Delta Machinery will perform clean, precise cuts every time. A heavy duty cast iron fence provides accurate jointing. With a precision-machined table and fence you’ll get to experience long lasting accuracy. Cut up to a max width of 6 inches and enjoy up to 1/8 in. depth of cut. The 37-071 Jointer comes with an impressive 5 Year Warranty.

Buy Now

Features

  • Durable cast iron construction increases weight providing stability and reducing vibration
  • Precision-machining of the table and fence ensures long term accuracy
  • Heavy duty, cast iron fence support system for accurate jointing
  • Simple fence adjust system with adjustable positive stops at 90˚ and 45˚ in and out
  • Up to 1/8 in. depth of cut
  • Aluminum cutterhead with two knives. Simple jackscrew arrangement offers easy adjustment when changing knives
  • Built-in dust blower ejects chips efficiently and virtually eliminates clogged dust chutes
  • Includes a pair of push blocks for easily and safely moving material through the jointer

Specifications

  • Motor: 12 A, 120V, 1 Phase, 60 Hz, Universal
  • Max. Depth of Cut: 1/8 in
  • Cuts per Minute: 20,000 CPM
  • Number of Knives: 2
  • Table Dimensions: 6 1/4 in. D x 28 1/2 in. W
  • Chip Chute Opening: 2 1/4 in. ID; 2 3/8 in. OD (included)
  • Product Dimensions: 17 in. D x 28 1/2 in. W x 12 1/4 in. H
  • Shipping Weight: 81 lbs.
  • Max. Width of Cut: 6 in.
  • lFence Positive Stops: 90˚ and 45˚ In/Out
  • Cutterhead Speed: 10,000 RPM
  • Aluminum Cutterhead Diameter: 1 7/8 in.
  • Fence Dimensions: 4 5/16 in. D x 22 7/8 in. W
  • Base Dimensions: 11 1/2 in. D x 21 in. W
  • Weight: 76 lbs.

Warranty

Delta Machinery 5 Year Warranty
23-197 8 in. Variable Speed Grinder

23-197 8 in. Variable Speed Grinder

Dull tools are a thing of the past with this Delta 8-in bench grinder in your workshop. Featuring a 5-amp induction motor that delivers variable speeds from 2,000 to 3,400-RPM, you can switch between sharpening and polishing or buffing tasks with ease. Two grinding wheels, including a 36 grit wheel and a 60 grit wheel provide versatility and minimize frequent wheel changes. A built-in light brightens your work space, allowing for precise results when sharpening your ax, mower blades or smoothing rough edges. Eye shields offer protection from sparks and other debris, keeping operation safe.

Buy Now

Features

  • Variable speed control offering you convenience and versatility in your grinding, sharpening, buffing and polishing operations
  • Upfront variable speed dial allows you to easily control speeds from 2,000 RPM to 3,400 RPM for a fine level of control depending on the materials you are working with
  • Features a 5 Amp induction-type motor for powerful performance
  • Incorporates two different grits for sharpening and grinding
  • The left hand tool rest has a drill bit rest milled into the surface so you’ll get the correct angle on the tip at all times
  • Two piece tool rests are independently adjustable to compensate for wheel wear and to achieve different angles
  • Water tray to help keep workpiece cool while grinding
  • Work light with a separate on/off switch and flexible goose neck provides illumination for set up and while grinding
  • Cast iron base for durability and reduces vibration during operation

Specifications

  • Motor: 5 AMP, 120 Volt, 1 Phase
  • Wheel Dimensions: 8 in. Diameter x 1 in. Thick
  • Wheel Grit: 36 and 60 Grit Wheels
  • Assembled Depth: 11 in
  • Assembled Height (not including light): 12 1/2 in.
  • Tool Weight: 41.1 lbs. (Net); 45.5 lbs. (Gross)
  • Shaft Diameter: 5/8 in.
  • Wheel Speed: 2,000 to 3,400 RPM
  • Cord Length: 6 feet
  • Assembled Width: 16 1/2 in.
  • Base Dimensions: 7 1/2 in. Depth x 9 3/4 in. Width

Warranty

Delta Machinery 5 Year Warranty
23-196 6 in. Variable Speed Grinder

23-196 6 in. Variable Speed Grinder

The Delta 6 in. Variable Speed Bench Grinder features variable speed control offering you convenience and versatility in your grinding, sharpening, buffing and polishing operations. The grinder features a 2 1/2 amp induction-type motor for powerful performance. It incorporates 2 different grits for sharpening and grinding. The left tool rest has a drill bit rest milled into the surface so you’ll get the correct angle on the tip at all times.

Buy Now

Features

  • The 23-196 6 in. Variable Speed Grinder has variable speed control offering you convenience and versatility in your grinding, sharpening, buffing and polishing operations
  • Upfront variable speed dial allows you to easily control speeds from 2,000 RPM to 3,400 RPM for a fine level of control depending on the materials you are working with
  • Features a 2 1/2 Amp induction-type motor for powerful performance
  • Incorporates two different grits for sharpening and grinding
  • The left tool rest has a drill bit rest milled into the surface so you’ll get the correct angle on the tip at all times
  • Two piece tool rests are independently adjustable to compensate for wheel wear and to achieve different angles
  • Water tray to help keep workpiece cool while grinding
  • Work light with a separate on/off switch and flexible goose neck provides illumination during set up and while grinding
  • Cast iron base for durability and reduces vibration during operation
  • Full-size safety shields are clear and have thumb screws for easy adjustment
  • Includes (1) 36 Grit Coarse Wheel, (1) 60 Grit Wheel, (4) rubber feet to help prevent movement, 2 safety shields, work light (40-Watt bulb not included), (2) fully-adjustable tool rests and diamond wheel dresser

Specifications

  • Motor: 2 1/2 AMP, 120 Volt, 1 Phase
  • Wheel Dimensions: 6 in. Diameter x 3/4 in. Thick
  • Wheel Grit: 36 Grit and 60 Grit Wheels
  • Assembled Depth: 11 in.
  • Assembled Height (not including light): 11 in
  • Tool Weight: 27.5 lbs. (Net); 31.9 lbs. (Gross)
  • Shaft Diameter: 1/2 in.
  • Wheel Speed: 2,000 to 3,400 RPM
  • Cord Length: 6 feet
  • Assembled Width: 14 1/2 in
  • Base Dimensions: 7 in. Depth x 9 in. Width

Warranty

Delta Machinery 5 Year Warranty

50-767 1 1/2 HP Motor Dust Collector

This 1 1/2 HP dust collector delivers powerful dust collection exactly where you need it and when you need it. With two stock 4” intake ports and easy portability you’ll be able to move around to all your machines and keep the shop dust free. The standard two micron filtration bags keep you safer and your shop cleaner. The powerful TEFC induction motor will be a workhorse in your shop allowing you to spend more time on projects and less time on sweeping up dust.

Buy Now

Features

  • The 50-767 includes motor and blower, support frame, 2 Micron Filtration Bag with Sewn-In Bag Ring, 6 mil plastic chip collection bag, (1) snap-in filter bag ring, (2) 4” intake ports, (2) swivel caster assemblies, two large 8” wheels, cord and plug
  • Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way
  • Ergonomic handle makes moving the unit a breeze
  • Greater CFM and static pressure with the same HP as competitor models thanks to the engineered barrel cone-F5 design.
  • Standard 2 micron filtration bag keeps your shop safer and cleaner
  • Sewn in, snap-in filter bag ring is faster, easier and eliminates the need for cam-over-lock style clamps
  • Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust
  • 6 mil plastic chip collection bag shows you when the bag needs emptying

Specifications

  • Motor: 1 ½ HP max, 120/240V (Wired 120V), 60 Hz, 1 Phase
  • Impeller Diameter: 11 ½”
  • Maximum Static Pressure: 8” of water
  • Chip Bag Area: 2.4 cu. ft. (67 L)
  • Length: 42.5”
  • Shipping Weight: 106 lbs.
  • Max CFM: 1500 CFM
  • Standard Bag Filtration: 2 Micron
  • Filter Bag Area: 20.5 sq. ft., 1.9 sq. m.
  • Width: 24.5”
  • Height: 92.5”

Warranty

Delta Machinery 5 Year Warranty

50-723 1 HP MOTOR DUST COLLECTOR

This 1 HP dust collector delivers powerful dust collection exactly where you need it and when you need it. The 50-723 includes a motor and blower, support frame, and a micron filtration bag. Its sturdy steel base with four easy-gliding wheels makes it ideal for moving from machine to machine or for storing out of the way. Equipped with a powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. Keep your shop clean and avoid dust with Delta Machinery’s 50-723 Dust Collector.

Buy Now

Features

  • The 50-723 includes motor and blower, support frame, 2 Micron Filtration Bag with Sewn-In Bag Ring, 6 mil plastic chip collection bag, (1) snap-in filter bag ring, (2) 4” intake ports, (2) swivel caster assemblies, two large 8” wheels, cord and plug.
  • Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way
  • Ergonomic handle makes mobility a snap
  • Greater CFM and Static Pressure with the same HP as competitors thanks to the engineered barrel cone-F5 design
  • Standard 2 micron filtration bag keeps your shop safer and cleaner
  • Sewn in, snap-in filter bag ring is faster, easier and eliminates the need for cam-over-lock style clamps
  • Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust
  • 6 mil plastic chip collection bag shows you when the bag needs emptying

Specifications

  • Motor: 1 HP max, 120/240V (Wired 120V), 60 Hz, 1 Phase
  • Filter Bag Area: 10sq. ft, .95 sq. m.
  • Width: 19”
  • Impeller Diameter: 9 1/2”
  • Length: 35”
  • Maximum Static Pressure: 5.5” of water
  • Chip Back Area: 1.7 cu. ft. (48L)
  • Max CFM: 750 CFM
  • Standard Bag Filtration: 2 Micron

Warranty

Delta Machinery 5 Year Warranty

18-900L 18 in. Laser Drill Press

Delta Machinery brings you the first professionally featured Drill Press designed with the woodworker in mind. With a 3/4 HP motor and a full 6 in. quill stroke, you’ll be able to get tough drilling jobs done. The patented oversized woodworker’s table bevels and tilts for compound drilling operations. This Drill Press also features T-slots for clamping and a removable center insert for through-table drilling.

Buy Now

Features

  • ​Auto-Tensioning Belt Drive System allows for fast and easy speed changes.
  • Full 6 in. Quill Stroke for deeper drilling applications and Best-In-Class capacity.
  • Micro-Adjustable Depth Stops and Independent Depth Scale allows the user to zero the scale and set up for repetitive drilling, quickly and easily.
  • Fully Adjustable TWINLASER projects a bright red crosshair on the work piece at the point of bit contact.
  • Flexible LED Light illuminates the work surface for better visibility.
  • CSA Listed
  • Accessories Shown Are Not Included

Specifications

  • ​Motor: 3/4 HP
  • Table Size: 20 in. x 14 in.
  • Table Insert: 3.75 in. x 3.75 in. x 0.75 in.
  • Spindle Taper: Morse #2
  • Quil Diameter: 52mm
  • Chuck Capacity: 5/8 in.
  • Chuck to Base Capacity: 42.5in.
  • width: 20 in.
  • Weight: 240 lbs.
  • Speeds: 16(170-3000)
  • Table Tilt: L/R 0-90° ; Forward 0-48°
  • Column Diameter: 80mm
  • Chuck Taper: Jacobs #3
  • Quill Stroke: 6 in.
  • Chuck to Table Capacity: 22.25 in.
  • Height: 70 in.
  • Depth: 28 in.
  • Shipping Weight: 261 lbs.

Warranty

Delta Machinery 5 Year Warranty

14-651 - 1/2 HP Mortiser

The frustration of mortising with a mallet and chisel are over. For precise, fast and accurate mortising, nothing beats the Delta Machinery Mortiser. Rigid cast iron construction and rack and pinion head ensure smooth consistent operation every time. Mortising head column can be turned 180° and remounted for off-table operation giving the machine virtually unlimited capacity.

Buy Now

Features

  • Easy and open access to drill chuck for bit changing
  • Large cast-iron base with center through hole
  • Adjustable fence and hold down
  • Adjustable dovetail way on mortising head
  • Gas-filled head-stabilizer
  • Height attachment adds 1 3/4 in. of additional capacity under head
  • Multi-position control handle
  • Adjustable depth stop

Specifications

  • Motor: 1/2 HP, 120V, 1 Phase, 60 Hz, 1,725 RPM
  • Chuck Capacity: 3/8 in.
  • Chisel Sizes: (5/8 in. max dia. shank) 1/4 in. x 1/4 in.; 5/16 in. x 5/16 in.; 3/8 in. x 3/8 in.; 1/2 in. x 1/2 in.
  • Stroke: max 5 in.
  • Under Head to Base: 9 3/8 in.
  • Chisel Center to Fence: 3 3/4 in.
  • Under Hold Down: 3 3/4 in.
  • Fence Size:
  • Each side: 2 15/16 in. x 5 13/16 in.
  • Overall: 13 5/8 in.
  • Table Size (includes post mounting area): 16 1/4 in. x 13 1/2 in.
  • Height: 30 in.
  • Width: 13.5 in.
  • Depth: 16.25 in.
  • Weight: 55 lbs.
  • Shipping Weight: 76 lbs.

Warranty

Delta Machinery 5 Year Warranty

14 in. 1 HP Steel Frame Bandsaw 28-400

This 14 inch heavy duty band saw from Delta Machinery features a Dual Voltage (115/230V) TEFC motor for powering through the most rigorous re-sawing applications needed for any woodworking project. The two speed pulley system provides the flexibility needed for cutting a variety of materials and the oversized cast iron table provides great support for larger cutting operations.

Buy Now

Features

  • Heavy duty steel frame design reduces flexing and features a superior finish and aluminum trunnion table support for long-lasting durability
  • Two speed drive system featuring tool less belt tensioning
  • Durable aluminum, rubber-coated upper and lower 9 spoke wheels are precision balanced for superior blade tracking
  • Standard size t-slot accepts all 3/4 in. x 3/8 in. miter gauges
  • Precision ball bearing upper and lower blade guides ensure consistent tracking for accurate cutting performance
  • Oversized table insert provides visibility when adjusting lower blade guides
  • Larger insert for visibility when changing lower guide settings
  • Includes 4 in. integral dust port, steel stand and a 93 1/2 in. wood-cutting blade
  • UL Listed

Specifications

  • Motor: 1 HP, 115/230V, 1 Phase
  • Speeds: 1,620 FPM and 3,340 FPM
  • Blade: 93 1/2 in. – 1/8 in. min. width to 3/4 in. max width
  • Table: 15 3/4 in. x 18 7/8 in., oversized, cast iron
  • Table Height: 40 3/4 in.
  • Cutting Capacity: 13 5/8 in. wide x 6 in. thick
  • Base Dimensions: 23 in. long x 16 wide
  • Dimensions on Stand: 27 in. x 19 in. x 65 1/2 in.
  • Shipping Dimensions: 44.69 in. x 17.72 in. x 21.46 in.
  • Weight: 164.9 lbs.
  • Shipping Weight: 180.4 lbs.

Warranty

Delta Machinery 5 Year Warranty

Connect With Us