Share This

36-L352 Type 2

3 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System

Get ready for something radically different. The UNISAW, has been redesigned from the ground up and loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There's even a BIESEMEYER Fence accurate to 1/64 in.

  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
  • On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
  • UL Listed
36-L352 Type 2
  • Specifications
  • Product Reviews (5)
  • Accessories
  • Parts
  • Manual
Motor: 3 HP, 230V, 1 Phase, 60 Hz Arbor Size: 5/8 in.
Blade Diameter: 10 in. Blade Speed: 4,300 RPM
Max Rip To Right Of Blade: 52 in. Max Rip To Left Of Blade: 13 1/2 in.
Depth of Cut at 45°: 2 1/8 in. Depth of Cut at 90°: 3 1/8 in.
Distance - Front of Table to Center of Blade: 18 1/2 in. Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
Max Width of Dado: 1 1/8 in. Miter Gauge Groove: 3/8 in. x 3/4 in.
Chip Exhaust Opening: 4 in. and 5 in. Table Height: 35 in.
Table Size of Cast Iron Top (with wings only): 31 in. x 40 in. Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 82 in.
Length: 87 in. Width: 37 in.
Width with Fence on Saw: 46 in. Height: 35 in.
Weight: 661 lbs.

DELTA will repair or replace, at its expense, and its option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center.

Get more info on DELTA's Warranty
Put your mouse over any of the displayed accessories for more information
  • 50-257
    For 36-L352 or 36-L552 52 in. UNISAW (Dual Front Crank Designed Unisaws)
  • 34-929
    Deluxe Miter Gauge
  • 34-184
    Universal Tenoning Jig
  • 34-976
    UNIGUARD® Blade Guard
  • 36-0101
    Delta Table Saw Arbor Wrench
  • 36-050
    Table Saw Push stick
  • 36-055
    Feather Board
  • 36-0944
    UNISAW Standard Throat Plate
  • 36-201
    Standard & Dado Arbor Nut Assembly
  • 36-727
    30IN Rail for T-Square Fence
  • 36-805
    UNISAW Zero Clearance Throat plate
  • 36-808
    UNISAW Dado Throat plate (Only for dual front hand wheel UNISAWS)
  • 36-T30
    30 in. DELTA® T2 Fence System
  • 78-055B
    52" Black BIESEMEYER Fence Rail
  • 78-130
    BIESEMEYER Commercial Systems
  • 78-138B
    36" Black BIESEMEYER Fence Rails
  • 78-850
    Universal Table Board
  • 78-939
    Cut-Off Fence
  • 78-940
    Auxiliary Fence
  • 78-9450
    BIESEMEYER Rear Outfeed Table
  • 79-056
    12' R-Tape 1/2 Metric/English
  • 79-057
    12' L-Tape 1/2 Metric/English
  • 79-061
    12' R-Tape 1/2 English
  • 79-062
    12' L-Tape 1/2" English
  • 79-064
    12' R-Tape 3/4" Metric/English
  • 79-065
    12' R-Tape 3/4" English
  • 79-066
    12' L-Tape 3/4" English
  • 79-067
    6' R-Tape 3/4" Metric/English
  • 79-068
    6' R-Tape 3/4" English
  • 79-069
    6' R-Tape 1/2" English
  • 79-070
    6' L-Tape 1/2" English
  • BC30
    BIESEMEYER Commercial Systems
  • BC50
    BIESEMEYER Commercial Fence System
Click any of the documents below to download
Product Manuals & Drawings for 36-L352 Type 2

Requirements

You will need a free copy of Adobe Acrobat Reader to view DELTA Manuals & Drawings.

Download Adobe Acrobat
Do you own this product? Write a review on this product.

Product Reviews for 36-L352 Type 2

  • glalonde 10 January 2013 at 13:59

    GT LaLonde
    I had an older model of Delta Table Saw. I had wanted this saw for for a long time 36-L352. This saw is amazing compared to the other Delta saw I owned. Don't know why someone would need a 5hp saw, this 3hp saw is plenty strong to cut any wood run through. I'm a cabinet and furniture builder and use much red oak. Have no problem running red oak through it. I ordered it with bids eyed outfeed table. If one can afford it that's the way you should order it. Don't know how I did without it this long. This is a very impressive saw and recommend that anyone buying a table saw purchase this one.

  • dawags 25 October 2012 at 19:29

    This is my third "Professional-Grade" table saw and the only one that actually lives up to that description. This machine is amazingly reliable in set up and super-stable. Although it takes up quite a foot print in my garage, the space is very well deserved. I am absolutely delighted with my saws performance and expect this to be the last table saw that I will ever purchase.

  • blemon 07 December 2011 at 02:39

    I've purchased this saw about a year ago and it's great. I love it, the fit and finish is excellent. The blade raise and tilt controls work great and the blade angle readout is very accurate. The blade guard and riving knife are very easy to install and remove. The only slight complaint I have is with the blade guard, I cannot move my miter gauge fence very close because it hits the blade guard support, so I find myself cross cutting without the gaurd. If you have the money, buy this saw! You won't regret it.

  • TBYehle45 28 July 2011 at 19:19

    I had purhcased a Steel City table saw...LOL... what a piece of crap. The Arbor broke.. Could have killed me. I returned it and paid the extra for the Delta table saw. wow. This should have been my first choice. My cutting time is not cut in half. The accuracy is unsurpassed. I am now looking at a new Delta thickness planer, as well as a drum sander. I need them for my business.

  • Capoturner 11 June 2011 at 11:04

    We bought one of these saws for our club and we are 100% satisfied with it. The fit and finish are excellent. The release mechanism for the riving knife is very convenient and the blade guard re attaches very easily. We are building 40' of cabinets from 1" plywood and it makes the job easy.

Login to your account to review this product.

Don't have an account? Start here.