Share This

36-L552LVC Type 2

5 HP Motor 3 PH Low Volt Control 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System

Get ready for something radically different. The UNISAW, has been redesigned from the ground up and loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There's even a BIESEMEYER Fence accurate to 1/64 in.

  • Power for production cutting, Low volt at the switch
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
  • On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
  • UL Listed
36-L552LVC Type 2
  • Specifications
  • Product Reviews (0)
  • Accessories
  • Parts
  • Manual
Motor: 5 HP, wired 230V, 3 Phase, 60 Hz Arbor Size: 5/8 in.
Blade Diameter: 10 in. Blade Speed: 4,300 RPM
Max Rip To Right Of Blade: 52 in. Max Rip To Left Of Blade: 13 1/2 in.
Depth of Cut at 45°: 2 1/8 in. Depth of Cut at 90°: 3 1/8 in.
Distance - Front of Table to Center of Blade: 18 1/2 in. Distance - Table in Front of Saw at Max Depth of Cut: 13 1/2 in.
Max Width of Dado: 1 1/8 in. Miter Gauge Groove: 3/8 in. x 3/4 in.
Chip Exhaust Opening: 4 in. and 5 in. Table Height: 35 in.
Table Size of Cast-Iron Top (with wings only): 31 in. x 40 in. Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 82 in.
Length: 87 in. Width: 37 in.
Width with Fence on Saw: 46 in. Height: 35 in.
Weight: 665 lbs.

DELTA will repair or replace, at its expense, and its option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center.

Get more info on DELTA's Warranty
Put your mouse over any of the displayed accessories for more information
  • 78-970
    BIESEMEYER Standard Accessory Drawer
  • 50-257
    For 36-L352 or 36-L552 52 in. UNISAW (Dual Front Crank Designed Unisaws)
  • 34-184
    Universal Tenoning Jig
  • 34-929
    Deluxe Miter Gauge
  • 34-976
    UNIGUARD® Blade Guard
  • 36-0101
    Delta Table Saw Arbor Wrench
  • 36-050
    Table Saw Push stick
  • 36-055
    Feather Board
  • 36-0944
    UNISAW Standard Throat Plate
  • 36-201
    Standard & Dado Arbor Nut Assembly
  • 36-727
    30IN Rail for T-Square Fence
  • 36-805
    UNISAW Zero Clearance Throat plate
  • 36-808
    UNISAW Dado Throat plate (Only for dual front hand wheel UNISAWS)
  • 36-T30
    30 in. DELTA® T2 Fence System
  • 78-055B
    52" Black BIESEMEYER Fence Rail
  • 78-130
    BIESEMEYER Commercial Systems
  • 78-138B
    36" Black BIESEMEYER Fence Rails
  • 78-850
    Universal Table Board
  • 78-939
    Cut-Off Fence
  • 78-940
    Auxiliary Fence
  • 78-9450
    BIESEMEYER Rear Outfeed Table
  • 79-056
    12' R-Tape 1/2 Metric/English
  • 79-057
    12' L-Tape 1/2 Metric/English
  • 79-061
    12' R-Tape 1/2 English
  • 79-062
    12' L-Tape 1/2" English
  • 79-064
    12' R-Tape 3/4" Metric/English
  • 79-065
    12' R-Tape 3/4" English
  • 79-066
    12' L-Tape 3/4" English
  • 79-067
    6' R-Tape 3/4" Metric/English
  • 79-068
    6' R-Tape 3/4" English
  • 79-070
    6' L-Tape 1/2" English
  • BC30 T2
    30-Inch (762mm) T-Square Fence and Rail System
  • BC50 T2
    50-Inch (1270) T-Square Fence and Rail System
Click any of the documents below to download
Product Manuals & Drawings for 36-L552LVC Type 2


You will need a free copy of Adobe Acrobat Reader to view DELTA Manuals & Drawings.

Download Adobe Acrobat
Do you own this product? Write a review on this product.

Product Reviews for 36-L552LVC Type 2

No product reviews have been posted for this product

Login to your account to review this product.

Don't have an account? Start here.